Tramex Surface Contact Temperature Probe Attachment for FeedBack Datalogger

Attaches to the Tramex FeedBack Datalogger (FL-RTHA & DL-RHTX) in order to measure Contact Temperature, Estimated contact RH, Ambient Dew Point, Contact Delta TemperatureUnits: ºF (ºC)Temperature Range: -20°F to +175°F (-30°C to...

Onset 25m Smart Sensor Extension Cable - S-EXT-M025

OverviewA 25-meter Smart Sensor male-to-male extender cable, plus a female-to-female adaptorIn what environment does this cable operate?This cable operates in indoor and outdoor environments.

Onset HOBO Self-Describing 20-foot Self-Describing Air/Water/Soil Temperature Sensor - SD-TEMP-20

Overview For use with HOBO MX1104 and MX1105 multi-channel data loggers, this air water soil temperature sensor offers integrated strain relief, so the probe is secured to the logger. And it features Self-Describing technology...

Onset Trans,0-200A,333mV Out CT,SCT-1250-200 - T-MAG-SCT-200

Overview The Magnelab AC Current 200 Amp AC Current Transformer or CT (Magnelab part # SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart...

Humidity Calibration Kit Extech RH300-CAL

The RH300-CAL is a kit which contains 33% and 75% humidity calibration bottles. Used for verifying calibration of the 445815 humidity meter. Bottles have small opening designed to snuggly fit the remote sensor probe. Extech RH300-CAL User Manual

Tramex Extension Handle & Bracket for use with ME5 & CME5 - E5-HBS

Tramex Extension Handle & Bracket for use with ME5, CME5, CMEX5 & SMM5 The Extension Handle can be used with the ME5, CME5, CMEX5 & SMM5 Moisture Meters. It is a useful tool for measuring in out of reach, high places. It can also be...

Onset Trans, 0-100A, 333mV Out CT, SCT-1250-100 - T-MAG-SCT-100

Overview The Magnelab AC Current 100 Amp AC Current Transformer or CT (Magnelab part # SCT-1250-100) is mounted around a current carrying wire to measure AC Amperage. This CT provides 333mV output proportional to current and is used with the FlexSmart...

Sensorcon Carbon Monoxide Tester Analyzer Kit for the CO Meters

Upgrade your Carbon Monoxide Inspector from a simple Carbon Monoxide meter to a CO analyzer with this inexpensive accessory kit! Includes a hand aspirated pump with inline filter, and a handy carrying case. **Carbon Monoxide Detector is not included and...

Sensorcon Hydrogen Sulfide Tester Analyzer Kit for the H2S Meters

Upgrade your H2S Inspector from a simple Hydrogen Sulfide meter to a H2S analyzer with this inexpensive accessory kit! Includes a hand aspirated pump with inline filter, and a handy carrying case. **Hydrogen Sulfide Detector is not included and must be...

Polymer Conductivity Cell Probe Extech LCR205

The Extech LCR205 is an optional chip component fixture for use with LCR200 LCR Meter. The LCR205 is useful for testing tasks like impedance evaluations on SMDs. The unit features three terminals for high, low and guard, as well as an adjustment knob to...

Polymer Conductivity Cell Probe Extech 804010A

The Extech 804010A is a Polymer Conductivity Cell Probe. For use with the 341350A-P Oyster pH/Conductivity/TDS/ORP/Salinity Meter. It has a 1 m (39 in) cable length. Product comes with a six-month warranty.    

Onset HOBO 1 Point NIST Temperature Traceable Calibration Certificate for Meters

Temperature point certification charge on a per-logger basis. This service provides testing and certification of Onset temperature data loggers' accuracy using standards traceable to the U.S. National Institute of Standards & Technology (NIST). For...