Product Description
Tramex Flooring Inspector Kit - FIK
Click Here for Tramex Accessories
A compact kit for instant and precise moisture testing of concrete and wood flooring. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative testing of concrete and comparative testing per ASTM F2659. Plug-in reusable RH probes allow for performing ASTM F2170 for relative humidity readings in concrete slabs. The Tramex heavy-duty wood pin-probe measures the moisture content of wood. An infrared surface thermometer gives surface temperature and dew point conditions used in conjunction with the CMEX5 hygrom- eter. The Flooring Inspector Kit comes with an extension handle in a heavy duty Tramex travel case. The Tramex Meters App allows you to GeoTag test results, create, save and share reports and charts, as well as see your meter screen on your phone when extending to hard to reach places.
CONTENTS
1. Concrete Moisture Encounter X5 - CMEX5
2. App available for Android and iOS (phone not included).
3. 1 x Hygro-i2 Relative Humidity Probe.
4. Heavy-duty pin-type wood probe.
5. Infrared Thermometer.
6. Hole Liners.
7. Extension Handle.
FEATURES OF CMEX5
The Tramex Concrete Moisture Encounter X5 is a non-destructive digital multi moisture meter for concrete decks providing instant and precise quantitative measurement of moisture content of concrete using Gravimetric testing as a baseline. The CMEX5 incorporates a built-in hygrometer and plug-in ports for the relative humidity probe and pin-type probe testing of roofing materials. Measures up to 6.9% Moisture Content in Concrete. Large clear backlit digital display. Hold function freezes meter reading when inspecting areas where the meter face is not visible. Also capable of attaching to the relative humidity Hygro-i2 ® probe for in situ testing of concrete. ASTM2170
FEATURES OF INFRARED THERMOMETER - IRT2
The IRT2 is a handheld, dual laser, non-contact Infrared Thermometer with 12:1 distance to spot ratio and audible and visible high/low set point alarms. It is used to measure and display surface temperatures within the range of -50°C to 650°C (-58ºF to 1202ºF) and has an accuracy of approximately 1 to 1.5%. The IRT2 has a fast response time (0.15 sec) and is powered with a 9V battery and complies with Class II UK/EU laser safety standard EN60285.
Tramex Flooring Inspector Kit Data