Tramex Hygro-i Hole Liners - 200 - RHHL200

Hygro-i Hole Liners - 200 sets of liners and caps. - RHHL200 Tramex Hygro-i2 19mm Hole Liners For ASTM F2170FOR IN-SITU CONCRETE RELATIVE HUMIDITY TESTINGHygro-i2 Hole Liners and Caps for use with Tramex Hygro-i2 relative humidity probes. To perform...

Tramex Hygro-i2 16mm Hole Liners (Not For ASTM F2170) - (100 Pack) RHHLsR

Hygro-i2 16mm Hole Liners - 100 sets of liners and caps. (Not for ASTM F2170) - RHHLsRFOR IN-SITU CONCRETE RELATIVE HUMIDITY TESTINGHygro-i2 Hole Liners and Caps for use with Tramex Hygro-i2 relative humidity probes. To perform BS8201, 8203, 5325 in situ...

Tramex Hygro-i Hole Liners - (100 Pack) RHHL100

Hygro-i Hole Liners - 100 sets of liners and caps. - RHHL100 Tramex Hygro-i2 19mm Hole Liners For ASTM F2170FOR IN-SITU CONCRETE RELATIVE HUMIDITY TESTINGHygro-i2 Hole Liners and Caps for use with Tramex Hygro-i2 relative humidity probes. To perform...

Tramex Hygro-i2 Probe - Pack of 100 sensors - HIPP100

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of...

Tramex Hygro-i2 Probe - Pack of 50 sensors - HIPP50

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of...

Tramex Hygro-i2 Probe - Pack of 25 sensors - HIPP25

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of...

Tramex Hygro-i2 Probe - Pack of 12 - HIPP12

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of...

Tramex Hygro-i2 Probe - Pack of 6 - HIPP6

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of...

Tramex Hygro-i2 Probe - Pack of 3 - HIPP3

Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of 3 -...

Tramex Set of 6 Calibration Salt Checks for Hygro-i relative humidity probes - SAL75-6

Tramex Set of 6 Calibration Salt Checks for Hygro-i relative humidity probes (re-useable saturated salts) for CMEXpert, MRH III, CMEX5 and DL-RXTX.

Tramex Hammer Electrode - HA21SP52

The HA-21 Slide Hammer electrode is interchangeable with the PTM2.0, CMExpert II, MRH III, Compact, Professional & WME Meters for hammering deep into wood and wood substrates. Supplied with one pair SP-52 Insulated Pins.For use with PTM2.0,...

Tramex Infrared Surface Thermometer W/ Built-In Hygrometer - IRT2DP

Infrared Surface Thermometer w/ built-in hygrometer for Relative Humidity & Dew Point readingsStandard Equipment Includes: Meter Instructions Precise non-contact Measurements Switchable °C/°F Temperature Units Automatic Data...

Tramex RHP-SW Probe (Formerly RHP-B)

RH probe converts the MRH III & CMEXpert II moisture meters to a digital hygrometer.

Tramex Infrared Surface Thermometer - IRT2

This hand held, infrared surface thermometer features a laser target pointer to gain instant readings on almost any surface from a distance. Standard Equipment Includes: Meter Instructions Precise non-contact Measurements Switchable °C/°F...

Tramex Digital Hygrometer - AZ8703

Standard Equipment Includes: Meter Instructions For fast and accurate measurement of relative humidity, temperature and dew point of the environment. Useful in industries such as Mold Remediation, Water Damage Restoration, Flooring etc. where...

Tramex Hand Held Electrode w/7" Insulated Pins - HH14SP200

Standard Equipment Includes: Hand held electrode w/3 foot cable 5/8" insulated penetration pins For use with the Compact & Professional pin-type meters and the new MRH III and CMEXpert II meters.

Tramex Wood Probe Interface Electronics

For use with the ORIGINAL CMEXpert and MRH II meters only.

Tramex Concrete Determinator Inspector Kit - CDIK

The complete kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 digital moisture meter allows for non-destructive quantitative...

Tramex Concrete Determinator Tech Kit - CDTK

A compact kit for instant and precise testing of both Surface and In-Body concrete Moisture Content in floors and slabs using a unified gravimetric-based testing method. The Tramex CMEX5 digital concrete moisture meter allows for non-destructive...

Tramex Concrete Determinator - CDK

The Tramex Concrete Moisture Probe, The Determinator, extends the capabilities of the Tramex Concrete Moisture Encounter range, providing in-situ Moisture Content readings in a Tramex Unified Moisture Content Test Method of quantitative Moisture Content...