Robust stainless steel Pt100 food probe IP65, calibratable - with PTB approval

Delivery Scope 1 x stainless steel food probe (Pt100) with PTB approval, including fixed cable (cable length 1.5 m).

Stainless steel NTC food probe, calibratable (IP65) - Rugged food probe, can be calibrated

Delivery Scope 1 x stainless steel food probe (NTC) with PTB approval, including plug connection IP54 and fixed cable (cable length 1.5 m).

Accurate, robust NTC air probe, calibratable - with PTB approval

Delivery Scope 1 x air probe (NTC) with PTB approval, including fixed cable (cable length 1.1 m).

Temperature probe to determine U-value

The U-value (formerly k-value) is the most important value used to rate the energy efficiency of building components. With the new testo 635 measuring this value has never been easier.Three...

Waterproof Pt100 immersion/penetration probe, calibratable - with PTB approval

Delivery Scope 1 x waterproof immersion/penetration probe (Pt100) with PTB approval, including fixed cable (cable length 1.1 m).

Waterproof NTC immersion/penetration probe, calibratable - with PTB approval

Delivery Scope 1 x waterproof immersion/penetration probe (NTC) with PTB approval, including fixed cable (cable length 1 m).

Highly accurate Pt100 immersion/penetration probe

High-precision temperature measurements pose no problem for this immersion/penetration probe with Pt100 sensor. Combined with a suitable Testo temperature measuring instrument, such as the testo 735,...

Spring Clamp Probe (NTC) - For pipes from ¼” to 2 1/2”

The Testo NTC spring clamp probe is compatible with the following Testo products: testo 550, testo 557, and testo 570. What's Included: Spring Clamp Probe (NTC) Delivery Scope 1 x pipe wrap...

Clamp temperature probe kit (fixed cable, NTC) - For measurements on pipes (Ø 6-35 mm)

Use the fixed cable clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the...

Clamp probe (NTC) - with 5 m cable length

Use the clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the measuring...

Clamp probe (NTC) - For pipes from ¼” to 1 1/3”

The Testo NTC clamp probe is compatible with the following Testo products: testo 550, testo 557, and testo 570. Delivery Scope Clamp Probe (NTC)

Velcro Pipe Wrap Probe (NTC) - Pipe probe

Use this temperature probe with NTC sensor to carry out surface temperature measurements on pipes with a pipe diameter of up to 75 mm. For example, you can use it to determine the surface temperature...