Tramex Hygro-i2 Probe - Pack of 100 sensors - HIPP100
Hygro-i2 RH probe converts the MRH III, CMEXpert II and CMEX5 moisture meters to a digital hygrometer. Requires Hygro-i 2 Electronic Interface. RHIE2 required for use with the CMEX2 and MRH3. RHIE2-B for use with Feedback DL-RHTX and CMEX5. Pack of 100 sensors - HIPP100
The Tramex Hygro-i2 ® relative humidity probe is the most advanced, resilient and reusable RH probe on the market today, allowing the user to perform in situ and hood type RH testing to comply with ASTM F2170 and ASTM F2420 for the ﬂooring industry, and is ideal for use by Flood & Water Damage Restoration and Indoor Air Quality professionals.
MEETING THE STANDARDS
For the evaluation of moisture conditions of concrete and other ﬂoor slabs, and ambient air conditions, by relative humidity measurement as per ASTM F2170 & ASTM F2420.
Used in conjunction with the Tramex CMEX II, CMEX5 or the Tramex MRH III non-destructive moisture meters, the Hygro-i2 ® probe provides measurements of relative humidity, temperature, dew point and grains per pound in structural materials such as concrete ﬂooring and walls, as well as the ambient conditions within the building envelope, all shown simultaneously on one clear display.
The Hygro-i2 ® probes are reusable, paying for themselves after a few uses compared to single-use, disposable RH probes. Calibration checks can be carried out at any time using the calibration check salts.
The Hygro-i2 ® probe is used with the CMEX II, CMEX5, DL-RHTX or the MRH III for relative humidity testing of ﬂooring slabs and ambient conditions.
- Fast acclimation time.
- Reusable Hygro-i ® Relative Humidity sensors prove to be the lowest cost per ASTM F2170 test.
- Accurate, durable and best in class.
- Testing per ASTM F2170 and ASTM F2420, giving in situ relative humidity and ambient RH, temperature, dew point temperature & grains per pound.
- Relative Humidity range: 0% to 99%
- Temperature Range: -40%F to 176F (-40%C to 80%C)