Flexible Clamp Meter CM57-2

The FLIR CM57-2 is a flexible clamp meter designed for difficult current measurements. With its 18-inch (45.72 cm) flexible coil clamp, the CM57-2 allows you to take measurements in tight spots, making it ideal for multiple-conductor measurements and...

Flexible flue gas probe

In measurements on heating system burners, obstructed measurement areas can occur (e.g. due to sloping roofs, cramped basement rooms). In these cases, straight flue gas probes can only be inserted into the flue with great difficulty. With flexible...

Flexible immersion measurement tip for measurements in air/e - for measurements in air / flue gases

Delivery Scope 1 x flexible immersion measuring tip (TC type K).

Flexible incoming goods probe, ideal for quick temperature m... - Flexible incoming goods probe

Delivery Scope 1 x measuring tip with TC connector type T. Product brochures Declaration of Conformity according to Reg. (EU) 1935/2004(pdf, 48.6 kB) Operating instructions Incoming goods probe 0628 0023(pdf, 99.2 kB)

Flexible oven probe, Tmax +250 °C, PTFE cable - Flexible oven probe

The flexible oven probe (thermocouple type T) can be used for temperature measurement at high temperatures (up to +250 °C). It is heat-resistant, because the probe cable is made of PTFE. You can use it, for example, for monitoring the temperature in...

FLIR VS80 Kits

The FLIR VS80 is a versatile, professional videoscope that you can rely on when inspecting locations that are difficult or unsafe to access. Seven unique compatible probes* with waterproof (IP67) camera tips are available to give you flexibility for...

Food probe (IP65) stainless steel - Rugged food probe (IP65)

The hygienic stainless steel food probe (NTC) is ideal for accurately recording temperatures in liquid and semi-solid foods. It delivers fast results thanks to its very short response time of just 8 seconds. Delivery Scope Stainless steel food probe...

Food probe, stainless steel (IP67)

The stainless steel food probe (NTC) is above all used for measuring the core temperature of foods. The fact that the probe is EN 13485 and HACCP-compliant, along with it being water-protected (according to IP 67), is particularly practical for use in...

Frozen food probe - corkscrew design

The frozen food probe (NTC) is used primarily for measuring the core temperature of frozen food. Thanks to a special handle and its helical tip, it can be screwed directly into frozen food without the need for pre-drilling. The probe is EN 13485 and...

Frozen food probe, corkscrew design - Frozen food probe

The frozen goods probe (TC type T) is primarily used for measuring the core temperature of frozen food. Thanks to a special handle and its helical tip, it can be screwed directly into frozen food without the need for pre-drilling. Delivery Scope 1 x...

Frozen food tip, 3.74 in. long

Delivery Scope 1 x frozen goods tip (length: 95 mm).

Gauge Fan Speed Control Cable

This cable connects the DG-700 or DG-1000 pressure and flow gauge, and a fan speed controller, via the 3.5 mm fan control jacks on each device. Connection allows the digital gauge to control the speed of the Minneapolis Blower Door™ or Duct...