Camera Probe for HDV700-Series HDV7C-A4-60-1

4-Way Articulating 6 mm × 1 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for HDV700-Series HDV7C-A4-60-3

4-Way Articulating 6 mm × 3 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for the HDV700-Series HDV7C-A2-45-15

2-Way Articulating 4.5 mm × 1.5 m Camera Probe for the Extech HDV700-Series High-Performance Videoscope    

Capacitance Decade Box Extech 380405

The Extech 380405 Capacitance Decade Box is very popular for product design testing and calibration because it can be substituted into a circuit and function in the place of any component with a standard value easily. Alternatively, it can be used to...

Carbon Monoxide (CO) Meter Extech CO15

Check CO levels up to 999ppm with the push of a button using Model CO15. An audible alarm indicator will continuously beep starting at 25ppm (preset warning level - value can be adjusted) and the display will flash until the CO level goes down to normal...

Carbon Monoxide Meter Extech CO10

Checking carbon monoxide levels is as easy as pushing just one button with the Extech C010. This meter can measure CO levels up to 1,000 ppm with a resolution of 1 ppm and ±5% or ±10 ppm basic accuracy (whichever is greater). The CO10...

CAT IV Insulation Tester/True RMS MultiMeter Extech MG320

Combines a portable 20GΩ/1000V Insulation Tester with a True RMS MultiMeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and quick results. Multimeter functions include AC/DC...

CFM/CMM Mini Thermo-Anemometer Extech AN100

The AN100 CFM/CMM Thermo-Anemometer can simultaneously display Air Flow or Air Velocity plus Ambient Temperature. Easy to set area dimensions (ft² or m²) are stored in the meter's internal memory for the next power on. Additional features...

CFM/CMM Mini Thermo-Anemometer with built-in InfraRed Thermometer Extech AN200

AN200 is a CFM/CMM Mini Thermo-Anemometer with built-in InfraRed Thermometer. Built-in non-contact IR Thermometer measures remote surface temperatures to 500°F (260°C) with 8:1 distance to spot ratio and Laser Pointer. This CFM/CMM...

Chlorine Standard Extech CL207

The CL207 is a Chlorine Calibration Standard for CL200 ExStik Waterproof Chlorine Meter. Product comes with 3 ampules.

Clamp meter adapter - for non-contact current measurement

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.The clamp meter adapter...

Clamp Meter and Thermal Imaging Camera with METERLiNK FLIR CM276

The FLIR CM276 clamp meter combines thermal imaging with electrical measurement for inspecting and troubleshooting electrical systems, solar panels, pumps, and motors. Through IGM™ (Infrared Guided Measurement), the CM276 provides a reliable way to...