Aluminum Frame Corner Block

Aluminum Frame Corner Block A frame corner block is fastened to both the top and bottom of the vertical blower door frame piece by a bolt and nut. The corner block snaps into the horizontal frame pieces when assembling the Blower Door frame.

Aluminum Frame End Cap

Aluminum Frame End Cap A replacement part for blower door frame pieces that provides a flat surface for the cam levers to lock and adjust the size of the frame.

Aluminum Frame Velcro® Strap

Aluminum Frame Velcro® Strap The Velcro® strap for a blower door aluminum frame cross bar, loops through to the blower door fan handle to stabilize the fan in the assembled blower door. Features Strong hook and loop Velcro holds the...

Ambient CO probe

Be alerted about CO concentrations which are hazardous to humans. Before entering a boiler room, a leak or some similar problem may endanger the life of the fitter. Tobacco smoke, petrol heaters, defective room heating furnaces and car exhausts are also...

Ball Probe Moisture Meter with Bluetooth® FLIR MR59

The FLIR MR59 is a pinless meter with wireless connectivity, which offers the convenience to view live readings from a mobile device via the FLIR METERLINK® App. Thanks to the ball-shaped sensor, users can cover a large area in a short time without...

Barrel Jack Gauge Power Adapter

Barrel Jack Power Adapter for Digital Gauges and Charger for DG-1000 with serial numbers 9540 and lower. Use only the TEC approved power adapter or charger cord with TEC digital gauges. Remove the AA batteries from the DG-700 or DG-500...

Building Inspection Kit MR160-KIT2

Troubleshoot moisture and building problems wherever you go with the FLIR MR160-KIT2. This kit features the MR160, a moisture meter with IGM™ to quickly target problem areas, as well as the C3-X, a full-featured, pocket-sized thermal camera...

Building Inspection System with Moisture Hygrometer & MSX IR Camera FLIR MR277

The MR277 is the first FLIR building inspection system to combine the advantages of Infrared Guided Measurement (IGM) and our patented Multi-Spectral Dynamic Imaging (MSX) with advanced environmental sensors to help you quickly locate, clearly...

Calibration Comparison Kit

Calibration Comparison Kit The Calibration Comparison Kit can be used to confirm that your gauge is still within the manufacturer’s calibration specification using a Reference Standard and includes tubing, tubing tees and a pressure syringe. The...

Cam Lever Unit for Horizontal Aluminum Frame Piece

Cam Lever Unit for Horizontal Aluminum Frame Piece This cam lever is for the horizontal pieces and cross bars of a blower door frame. Once adjusted to fit inside the door or window opening, the cam lever locks the horizontal frame pieces at that width...

Cam Lever Unit for Vertical Aluminum Frame Piece

Cam Lever Unit for Vertical Aluminum Frame Piece This cam lever is for the vertical pieces of a blower door frame. Once adjusted to fit inside the door or window opening, the cam lever locks the vertical frame pieces at that height. Features The cam...

Camera Probe for HDV700 HDV7C-P28-30

28 mm Camera Probe with 30 m Plumbing Spool for Extech HDV700