16x25 TrueFlow® Adapter

16x25 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

18 Inch Universal Flex Current Probe Accessory FLIR TA74

The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for...

2 Rolls of 24" DuctMask™ Premium Temporary Register Sealing Tape

DuctMask™ Premium Temporary Register Sealing Tape Sold by the case only. This case contains: 2 rolls of tape. Each are 24 inches wide, 200 feet long, and have 24 inch perforations. DuctMask™ Premium Temporary Register Sealing Tape is...

20:1 Spot IR Thermometer FLIR TG54-2™

The FLIR TG54-2 provides non-contact temperature readings so you can swiftly and effortlessly take measurements without compromising on safety. Providing a distance-to-spot ratio of 20:1, the TG54-2 can measure smaller targets from a safer distance...

20x20 TrueFlow® Adapter

20x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x24 TrueFlow® Adapter

20x24 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x25 TrueFlow® Adapter

20x25 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x30 TrueFlow Adapter

20x30 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

24x24 TrueFlow® Adapter

24x24 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

24x30 TrueFlow Adapter

24x30 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.  

3/8" Hex Shank Drill Bit with Hole Plugs

3/8" Hex Shank Drill Bit with Hole Plugs This drill bit is specially designed for drilling into HVAC equipment during testing with the Digital TrueFlow® Air Handler Flow Meter. The 3/8-inch diameter drill bit extends only 5/16-inch from...

30' Clear Hose Tubing

30' Clear Hose Tubing One length of flexible PVC hose tubing for use with 1/8" hose barb fittings. Compatible with all standard TEC equipment with air hose taps including the Minneapolis Blower Door™, Minneapolis Duct Blaster®, DG-1000, DG-8,...