1200A Flexible Current Clamp Probes Extech PQ3210

The Extech PQ3210 is a set of three flexible 1200 Amp flex clamps for the Extech PQ3350 3-Phase Power and Harmonics Analyzer. These probes are 304 mm (12 in) long for wrapping around busbars.      

14x20 TrueFlow® Adapter

14x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

15' Green Hose Tubing

15' Green Hose Tubing One length of flexible PVC hose tubing for use with 1/8" hose barb fittings. Compatible with all standard TEC equipment with air hose taps including the Minneapolis Blower Door™, Minneapolis Duct Blaster®, DG-1000, DG-8,...

15' Yellow Hose Tubing

15' Yellow Hose Tubing One length of flexible PVC hose tubing for use with 1/8" hose barb fittings. Compatible with all standard TEC equipment with air hose taps including the Minneapolis Blower Door™, Minneapolis Duct Blaster®, DG-1000, DG-8,...

16 mm vane probe head including temperature sensor

Simply plug the probe head onto the extendable telescope for air velocity probes and use the adapter (order number 0554 2160) to attach them both to the handle with Bluetooth or cable. Delivery Scope 16 mm vane probe head including temperature sensor...

16x20 TrueFlow® Adapter

16x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

16x25 TrueFlow® Adapter

16x25 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

18 Inch Universal Flex Current Probe Accessory FLIR TA74

The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for...

2 Rolls of 24" DuctMask™ Premium Temporary Register Sealing Tape

DuctMask™ Premium Temporary Register Sealing Tape Sold by the case only. This case contains: 2 rolls of tape. Each are 24 inches wide, 200 feet long, and have 24 inch perforations. DuctMask™ Premium Temporary Register Sealing Tape is...

2000A True RMS AC/DC Clamp Meter Extech 380926

The Extech 380926 is a category IV, 2000-Amp, TRMS AC/DC clamp meter with a rugged 2 in. jaw to accommodate two 500 MCM cables. A built-in full-function DMM can measure AC/DC voltage and current, resistance, capacitance, frequency, duty cycle, diode and...

200A AC/DC Mini Clamp Meter Extech 380941

The compact Extech 380941 is a 200 Amp mini AC/DC clamp meter with a small diameter jaw designed to reach in small areas while providing 10mA resolution (DC) and very low-current sensitivity. This mini clamp meter is useful for troubleshooting tasks in...

200A Current Clamp Probes Extech PQ34-2

The Extech PQ34-2 is a set of 200 Amp Current Clamp Probes. Use with the PQ3450 and PQ3470 analyzers. Featuring a 19 mm (0.8 in) jaw size, this product comes with three current clamp probes and a year warranty. Extech PQ34-2 Declaration of...