Phase II Large Frame Digital Motorized BRINELL Hardness Tester 900-356

Product Description

Phase II Large Frame Digital Motorized BRINELL Hardness Tester 900-356

Phase II Large Frame Digital Motorized BRINELL Hardness Tester 900-356

Load Cell driven system provides precise control of test force application

• Direct digital reading
• Engineered to obtain highly sensitive and accurate readings
• Perfect for laboratories, workshops, tool rooms, inspection labs, etc.
• Measuring Range: 3.18-650HBW

• Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate Brinell hardness measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
• The gross weight of the tester is 50% less than the traditional dead weights type testers.
• Test load selection by keypad and shown on the LCD screen.
• Fully automatic test cycles. The Brinell hardness Tester features a fully automatic test cycle, load application, dwell, unloading, is performed fully automatically. This greatly improves reproducibility of test results since operator influence is eliminated.
• Selectable dwell times by screen. The indenter, load, and other test information are shown clearly on the large LCD screen.
• The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
• Equipped with a 20X optical microscope to measure the diameter of Brinell indention.
• Brinell Hardness Calculator (BHC) makes the hardness value calculation easy and convenient.

Technical data:

• Loads： 3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),100Kgf (980N), 62.5Kgf(612.9N)
• Load dwell duration: 2s～99s, can be set and stored
• Tungsten Carbide Ball indenter: 10mm, 5mm, 2.5mm
• Measuring range: 3.18HBW~ 658HBW
• Magnification of the microscope: 20X
• Resolution capability of the microscope: 0.005mm
• Accuracy of Brinell Hardness Value:

• Max measurable height: 430 mm (w/large anvil) 450mm (w/small anvil)
• Max measurable depth: 200 mm
• Dimensions: 600mm×300mm×1000mm
• Power supply: 220/110 V, 50/60 Hz, 4A
• Weight: 205kg (gross) 165kg(net)