15' Green Hose Tubing

15' Green Hose Tubing One length of flexible PVC hose tubing for use with 1/8" hose barb fittings. Compatible with all standard TEC equipment with air hose taps including the Minneapolis Blower Door™, Minneapolis Duct Blaster®, DG-1000, DG-8,...

Aluminum Frame Corner Block

Aluminum Frame Corner Block A frame corner block is fastened to both the top and bottom of the vertical blower door frame piece by a bolt and nut. The corner block snaps into the horizontal frame pieces when assembling the Blower Door frame.

Cam Lever Unit for Horizontal Aluminum Frame Piece

Cam Lever Unit for Horizontal Aluminum Frame Piece This cam lever is for the horizontal pieces and cross bars of a blower door frame. Once adjusted to fit inside the door or window opening, the cam lever locks the horizontal frame pieces at that width...

Wind Tee

Wind Tee The Wind Tee is designed to be connected to your outdoor reference tubing to provide a more stable reading and keep the hose away from moisture during Blower Door tests. Studies suggest best practice for measurements on windy days is to place...

30' Clear Hose Tubing

30' Clear Hose Tubing One length of flexible PVC hose tubing for use with 1/8" hose barb fittings. Compatible with all standard TEC equipment with air hose taps including the Minneapolis Blower Door™, Minneapolis Duct Blaster®, DG-1000, DG-8,...

Cam Lever Unit for Vertical Aluminum Frame Piece

Cam Lever Unit for Vertical Aluminum Frame Piece This cam lever is for the vertical pieces of a blower door frame. Once adjusted to fit inside the door or window opening, the cam lever locks the vertical frame pieces at that height. Features The cam...

Aluminum Frame Velcro® Strap

Aluminum Frame Velcro® Strap The Velcro® strap for a blower door aluminum frame cross bar, loops through to the blower door fan handle to stabilize the fan in the assembled blower door. Features Strong hook and loop Velcro holds the...

Aluminum Frame End Cap

Aluminum Frame End Cap A replacement part for blower door frame pieces that provides a flat surface for the cam levers to lock and adjust the size of the frame.

Upper Cross Bar Aluminum Hook

Upper Cross Bar Aluminum Hook This hooked-shaped piece is fastened at the ends of an upper cross bar in the blower door frame. The upper cross bars are used to support a second or third fan in a single frame. The hook helps insert the end of the cross...

Lower Cross Bar Aluminum Hook

Lower Cross Bar Aluminum Hooks This hooked-shaped piece is fastened at the ends of a lower cross bar in the blower door frame. If you only have one cross bar supporting one fan in a blower frame, it is the lower crossbar. The hook helps insert the end of...

Gauge Hanger Bar for Blower Door Frame

Gauge Hanger Bar Replacement gauge hanger bar for use with all Minneapolis Blower Door™ frame sets. Features Frame hooks allow bar to be hung from either left or right side of the frame Intended for use with gauge boards with clamp

Vertical Frame Piece

Vertical Frame Piece One replacement vertical frame piece for the standard Blower Door aluminum frame set. Easily adjustable up to 96" long and features an integrated EPDM gasket for a tight seal.  Frame corner blocks on each end help it quickly...