Delmhorst 2-E (5/16 inchPenetration) Electrode

Uses the same contact pins that are mounted on each meter. This electrode is great to use in hard to reach places. Ideal for the home inspector and pest control operator. Two pins 5/16" penetration

Delmhorst 52-E/C Cup type electrode used for lint or seed cotton.

Cup type electrode used for lint or seed cotton.

Delmhorst 830-4 36" Prod for Hay & Paper Meters *(Requires H4 Handle!)*

830-4: 36" Prod - for testing standard and high density bales. Use with H-4 Handle.

Delmhorst 830-5 12" Prod for the G-34 Hops Moisture Meter *(Requires H4 Handle!)*

830-5: 12" Prod - for testing standard and high density bales.(For Hops) Use with H-4 Handle.

Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer

Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe by Delmhorst.1-1/8" Penetration

Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter

313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper electrode assembly.

Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters

The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic material such as plastic or fiberglass to insulate the...

Delmhorst 832 Long Pin Prod (seed and grain in bags)

Long pin prod – for testing grain in bulk (requires H-4 Handle).

Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter

The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly.

Delmhorst Pack of 24 Pins (11/16 inch penetration) for 2-E Electrode

Contact pins used on 2-E electrode with 11/16" penetration. Can also be used to conect directly to all delmhorst standard pin type meters. (However, pin cap will not fit when these large pins are attached directly to your meter.)

Delmhorst Hole Punch

Makes pilot holes in stucco to reduce pin damage

Delmhorst 831 Short pin prod for Hay Meters

For testing hay in the windrow (requires H-4 Handle).