Replacement Gasket Set for TrueFlow® Adapter Plates

Replacement Gasket Set for TrueFlow® Adapter Plates Set of four 30-inch long pieces of Digital TrueFlow® adapter plate gasket. The trim pieces can be trimmed to length to replace damaged gasket on TrueFlow® adapter plates of any...

Minneapolis Blower Door™ Ring E

Blower Door Fan Flow Ring E Ring E is an optional flow ring for Model 3 & 4 Minneapolis Blower Door™ fans. Ring E measures air flows between 45 - 11 CFM. Ring E attaches inside Ring D by rotating the 3 fastener clips. When using Rings D and E,...

Minneapolis DuctBlaster® Ring 2

Minneapolis DuctBlaster® Flow Ring 2 Ring 2 for the Minneapolis DuctBlaster® fan measures 300 – 90 CFM with a minimum fan pressure of 25 Pascals. The flow ring temporarily attaches to the fan housing with a 40 inch piece of trim...

20x24 TrueFlow® Adapter

20x24 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

16x20 TrueFlow® Adapter

16x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

14x20 TrueFlow® Adapter

14x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

Universal TrueFlow® Adapter

Universal TrueFlow® Adapter One uncut 25x25 adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter during testing. This universal adapter plate and gasket must be cut to size and assembled...

16x25 TrueFlow® Adapter

16x25 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x20 TrueFlow® Adapter

20x20 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x25 TrueFlow® Adapter

20x25 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

24x24 TrueFlow® Adapter

24x24 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.

20x30 TrueFlow Adapter

20x30 TrueFlow® Adapter One pre-cut adapter with gasket for use with the Digital TrueFlow® Grid used to temporarily replace a filter of the same size during testing.