Minneapolis DuctBlaster® Foam Foot

Duct Blaster® Foam Foot Replacement foam foot to support Duct Blaster® fan during testing.  

Minneapolis DuctBlaster® Fan Trim

Fan Trim for the Minneapolis DuctBlaster® Fan The Trim Piece secures the Minneapolis DuctBlaster® fan to the round transition piece or the fan to a flow ring during a leakage test. The Trim Piece is a single length of 40 inches.  

Minneapolis DuctBlaster® Velcro® Strap for Flex Duct

Velcro® Strap for the Duct Blaster® Flex Duct The replacement Velcro® Strap for the Duct Blaster.® Cinches the flex duct onto the transition pieces.  

Minneapolis DuctBlaster® Fan Black Nylon Cover

Minneapolis DuctBlaster® Fan Black Fabric Cover The black fabric cover for the Series B Minneapolis DuctBlaster® fan, is a component of our Duct Blaster® system, and included if you purchase a new fan. Features Tough heavyweight nylon...

Red Protective Rubber Boot for DG-1000 Gauge

Red Protective Rubber Boot for DG-1000 Gauge Protect your DG-1000 in the field with a shock-absorbing protective boot! The red silicone boot fits the DG-1000 like a glove while offering full access to all the pressure taps, connection ports...

Minneapolis Blower Door™ Ring E

Blower Door Fan Flow Ring E Ring E is an optional flow ring for Model 3 & 4 Minneapolis Blower Door™ fans. Ring E measures air flows between 45 - 11 CFM. Ring E attaches inside Ring D by rotating the 3 fastener clips. When using Rings D and E,...

Minneapolis DuctBlaster® Flow Conditioner

Flow Conditioner for the Duct Blaster® Fan The foam Flow Conditioner is used when the Duct Blaster® flex duct is attached to the inlet side of the fan. These applications include duct leakage depressurization tests, using the Duct Blaster®...

Minneapolis DuctBlaster® Square Transition

Minneapolis DuctBlaster® Square Transition Piece This Minneapolis DuctBlaster® component is connected to a central return grille or at an air handler cabinet during a duct leakage test. See Chapter 5 of the Minneapolis DuctBlaster® User...

Minneapolis DuctBlaster® Field Calibration Plate

Calibration Plate for Duct Blaster® System The Calibration Plate for Duct Blaster® System is a diagnostic tool designed to simulate a duct leakage test to determine if your equipment is in need of repair or calibration service. DuctBlaster...

DG-1000 Gauge Board with Clamp

DG-1000 Gauge Board with Clamp This gauge board with clamp is used with the DG-1000 Pressure and Flow Gauge. The strong magnets on the DG-1000 and board create a secure attachment. A fan speed controller can also be clipped to the board below the...

Minneapolis DuctBlaster® Ring 1

Minneapolis DuctBlaster® Flow Ring 1 Ring 1 for the Minneapolis DuctBlaster® fan measures 800 – 225 CFM with a minimum fan pressure of 25 Pascals. The flow ring temporarily attaches to the fan housing with a 40 inch piece of trim (item...

Minneapolis DuctBlaster® Ring 2

Minneapolis DuctBlaster® Flow Ring 2 Ring 2 for the Minneapolis DuctBlaster® fan measures 300 – 90 CFM with a minimum fan pressure of 25 Pascals. The flow ring temporarily attaches to the fan housing with a 40 inch piece of trim...