CAT IV Insulation Tester/True RMS MultiMeter Extech MG320

Combines a portable 20GΩ/1000V Insulation Tester with a True RMS MultiMeter. Insulation tester includes PI/DAR modes, programmable timer, and a comparator for custom test configurations and quick results. Multimeter functions include AC/DC...

Clamp meter adapter - for non-contact current measurement

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.The clamp meter adapter...

Clamp Meter and Thermal Imaging Camera with METERLiNK FLIR CM276

The FLIR CM276 clamp meter combines thermal imaging with electrical measurement for inspecting and troubleshooting electrical systems, solar panels, pumps, and motors. Through IGM™ (Infrared Guided Measurement), the CM276 provides a reliable way to...

Clamp probe (NTC) - For pipes from ¼” to 1 1/3”

The Testo NTC clamp probe is compatible with the following Testo products: testo 550, testo 557, and testo 570. Delivery Scope Clamp Probe (NTC)

Clamp probe (NTC) - with 5 m cable length

Use the clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the measuring instrument connected, the clamp probe can be used to...

Clamp Probe Surface Probe - for temperature measurements on pipes (Ø 15-25 mm)

Delivery Scope 1 x clamp probe (TC type K) for temperature measurements on pipes (Ø 15-25 mm) with fixed cable.

Clamp probe with NTC temperature sensor - for measurements on pipes (Ø 6-35 mm)

For fast, precise temperature measurements: use the clamp probe (NTC) with the compatible measuring instrument (please order separately) to measure the surface temperature of pipes.  Clamp probe (NTC) – equipment and areas of application Use...

Clamp temperature probe kit (fixed cable, NTC) - For measurements on pipes (Ø 6-35 mm)

Use the fixed cable clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the connected measuring instrument, the robust clamp probe...

Clamp-on Ground Resistance Tester Extech 382357

The 382357 is a Clamp-On Ground Resistance Tester that enables non-contact measurements of ground conductors. True RMS AC Leakage current range of 0.2mA to 30A with 1.000mA resolution. Programmable Datalogging with 116 data points. Performs without...

Clamp-on Ground Resistance Tester Extech SDL310

The SDL310 records data on an SD card in Excel format. Measures Air Temperature to 122°F (50°C) and air velocity to 4930ft/min. Stores 99 readings manually and 20M readings via 2G SD card. Stores 99 readings manually and 20M readings via 2G SD...

CMM/CFM Anemometer/Psychrometer Datalogger Extech AN340

The AN340 is a CMM/CFM Anemometer/Psychrometer Data logger. This meter measures Air Velocity/Volume, Temperature, Humidity, Wet Bulb, and Dew Point. User can store up to 12,000 readings for data analysis. Manually store/recall up to 99 reading. Complete...

CO Experts Model 2016 Low Level Carbon Monoxide Monitor - 2016-10

The CO EXPERTS model 2016 is considered by many one of the industries’ best Low-Level Carbon Monoxide Health monitors available to the consumer today. Its unique style allows for either wall mounting or portable use with the included free-standing...