Camera Probe for HDV700-Series HDV7C-49-DUAL-1

Dual HD 4.9 mm × 1 m Camera Probe for the Extech HDV700-Series High-Performance Videoscope  

Camera Probe for HDV700-Series HDV7C-55-3

5.5 mm × 3 m camera probe for the Extech HDV700-Series High-Performance Videoscope    

Camera Probe for HDV700-Series HDV7C-A2-39-HD-1

HD 2-Way Articulating 3.9 mm × 1 m Camera Probe for Extech HDV700-Series High-Performance Videoscope

Camera Probe for HDV700-Series HDV7C-A4-60-1

4-Way Articulating 6 mm × 1 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for HDV700-Series HDV7C-A4-60-3

4-Way Articulating 6 mm × 3 m Camera Probe for Extech HDV700-Series High-Performance Videoscope  

Camera Probe for the HDV700-Series HDV7C-A2-45-15

2-Way Articulating 4.5 mm × 1.5 m Camera Probe for the Extech HDV700-Series High-Performance Videoscope    

Clamp meter adapter - for non-contact current measurement

You can easily manage even in tight spots with this clamp meter adapter! The movable pincer arm can be fully retracted, so that you can for instance grab tightly packed cables in switching cabinets as if you were using a hook.The clamp meter adapter...

Clamp Meter and Thermal Imaging Camera with METERLiNK FLIR CM276

The FLIR CM276 clamp meter combines thermal imaging with electrical measurement for inspecting and troubleshooting electrical systems, solar panels, pumps, and motors. Through IGM™ (Infrared Guided Measurement), the CM276 provides a reliable way to...

Clamp probe (NTC) - For pipes from ¼” to 1 1/3”

The Testo NTC clamp probe is compatible with the following Testo products: testo 550, testo 557, and testo 570. Delivery Scope Clamp Probe (NTC)

Clamp probe (NTC) - with 5 m cable length

Use the clamp probe (NTC) to accurately measure surface temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps (pipe diameter 6 to 35 mm). Depending on the measuring instrument connected, the clamp probe can be used to...

Clamp Probe Surface Probe - for temperature measurements on pipes (Ø 15-25 mm)

Delivery Scope 1 x clamp probe (TC type K) for temperature measurements on pipes (Ø 15-25 mm) with fixed cable.

Clamp probe with NTC temperature sensor - for measurements on pipes (Ø 6-35 mm)

For fast, precise temperature measurements: use the clamp probe (NTC) with the compatible measuring instrument (please order separately) to measure the surface temperature of pipes.  Clamp probe (NTC) – equipment and areas of application Use...