Filter Grille Attachment Panel

Filter Grille Attachment Panel

The Filter Grille Attachment Panel is an optional accessory to the Duct Blaster^® System, and used when setting up the fan at a central return. The return grille and filter are removed, and the panel is installed in the filter slot. The panel comes in one size, 20 inches x 20 inches.

Features

• The H-channel gasket on the edges of the panel, provide an airtight seal between the panel and filter slot and hold the panel in place
• Four clips, mounted around the hole in the center of the panel, secure the Duct Blaster^® fan to the panel