Delmhorst Pack of 24 Pins (1-1/8 inch Penetration) for the 26ES Hammer

Standard on the 26-ES, the #496 contact pins are insulated except at the tips. 2" overall length, 1 1/8" penetration. Used on wood up to 5" thick.Pack of 24 replacement pins for the 26ES hammer probe...

Delmhorst 313CUP-0006 sample Cup for G-7 Grain Moisture Meter

313CUP-0006: Delmhorst Sample Cup (for 315ELE-0024) The 313CUP-0006 is a replacement sample cup with smooth surface for checking flour using the G-7 grain moisture meter. Used with 315ELE-0024 upper...

Delmhorst The SCB-1 calibration block for Proscan and Techscan moisture meters

The SCB-1 calibration block may be used for field calibration checks of the Proscan and Techscan moisture meters. We recommended using a 4” x 4” Styrofoam block or other non-conductive, nonmagnetic...

Delmhorst 832 Long Pin Prod (seed and grain in bags)

Long pin prod – for testing grain in bulk (requires H-4 Handle).

Delmhorst 313CUP-0005 sample Cup for G-7 Grain Moisture Meter

The 313CUP-0005 is a replacement sample cup for G-7 grain moisture meter. Used with 1900 upper electrode assembly.

Delmhorst Pack of 24 Pins (11/16 inch penetration) for 2-E Electrode

Contact pins used on 2-E electrode with 11/16" penetration. Can also be used to conect directly to all delmhorst standard pin type meters. (However, pin cap will not fit when these large pins are...

Delmhorst Hole Punch

Makes pilot holes in stucco to reduce pin damage

Delmhorst 831 Short pin prod for Hay Meters

For testing hay in the windrow (requires H-4 Handle).

Delmhorst 1/2 inch Penetration Contact Pins

Replacement contact pins used on the 22-E, 22-ET and 26-ES Hammer electrodes.Overall Pin Length: 1-7/16"Penetration: 1/2"

Delmhorst NIST Traceable Calibration Certificate for Meters

Delmhorst NIST Traceable Calibration Certificate for Meters**Please note this will add 7-10 days on the delivery unless you are shipping 2 Day Air or Next Day Air. If 2 Day Air or Next Day Air, it...

Delmhorst Retainer - Pack Of 4 - compatible with 608 pins - 305RET-0021/4

305RET-0021 Retainer used to hold contact pins in place. Used with #608 and #608/001. Available in packs of 4 as 305RET-0021/4.