Plastic T Hose Connector

Plastic T Hose Connector Use a Plastic T Hose Connector to join three pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for hose with an interior diameter of 1/8th inch.

Calibration Comparison Kit

Calibration Comparison Kit The Calibration Comparison Kit can be used to confirm that your gauge is still within the manufacturer’s calibration specification using a Reference Standard and includes tubing, tubing tees and a pressure syringe. The...

Digital Gauge Extension Tube

Digital Gauge Extension Tube This metal tube probe can be inserted into the end of a piece of our flexible tubing.  The other end of the tubing is then connected to an input tap of our digital pressure and flow gauges to help collect a pressure...

DG-8 Digital Pressure Gauge

DG-8 Digital Pressure Gauge The DG-8 Digital Pressure Gauge is a cost-effective and highly accurate single channel micro-manometer. Never before has TEC accuracy been more accessible for critical building pressure measurement applications. TEC DG-8...

DG-1000 Digital Pressure and Flow Gauge

DG-1000 Digital Pressure and Flow Gauge Two-channel digital micro manometer for pressure and flow measurements.  Primarily used with Minneapolis Blower Door™ and Minneapolis DuctBlaster® Features Fast-charge & communication...

Minneapolis DuctBlaster® Carrying Case

Minneapolis DuctBlaster® Carrying Case This heavyweight nylon case aids in transportation of the Minneapolis DuctBlaster® system to and from the job site. Additional Minneapolis DuctBlaster® components sold...

Polypro Hose Connector - Tapered

Polypro Hose Connector Use a tapered Polypropylene Hose Connector to join two pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for standard TEC tubing with an interior diameter of 1/8th inch...

Plastic Hose Connector

Plastic Hose Connector Use a Plastic Hose Connector to join two pieces of hose needed for TEC diagnostic testing applications. The connector barbs are suited for hose with an interior diameter of 1/8th inch.

Barrel Jack Gauge Power Adapter

Barrel Jack Power Adapter for Digital Gauges and Charger for DG-1000 with serial numbers 9540 and lower. Use only the TEC approved power adapter or charger cord with TEC digital gauges. Remove the AA batteries from the DG-700 or DG-500...

Red Protective Rubber Boot for DG-1000 Gauge

Red Protective Rubber Boot for DG-1000 Gauge Protect your DG-1000 in the field with a shock-absorbing protective boot! The red silicone boot fits the DG-1000 like a glove while offering full access to all the pressure taps, connection ports...