Filter Grille Attachment Panel

Filter Grille Attachment Panel The Filter Grille Attachment Panel is an optional accessory to the Duct Blaster® System, and used when setting up the fan at a central return. The return grille and filter are removed, and the panel is installed in...

Minneapolis DuctBlaster® Fan Black Nylon Cover

Minneapolis DuctBlaster® Fan Black Fabric Cover The black fabric cover for the Series B Minneapolis DuctBlaster® fan, is a component of our Duct Blaster® system, and included if you purchase a new fan. Features Tough heavyweight nylon...

Minneapolis DuctBlaster® Velcro® Strap for Flex Duct

Velcro® Strap for the Duct Blaster® Flex Duct The replacement Velcro® Strap for the Duct Blaster.® Cinches the flex duct onto the transition pieces.  

Minneapolis DuctBlaster® Foam Foot

Duct Blaster® Foam Foot Replacement foam foot to support Duct Blaster® fan during testing.  

Minneapolis DuctBlaster® Flow Conditioner

Flow Conditioner for the Duct Blaster® Fan The foam Flow Conditioner is used when the Duct Blaster® flex duct is attached to the inlet side of the fan. These applications include duct leakage depressurization tests, using the Duct Blaster®...

Minneapolis DuctBlaster® Fan Trim

Fan Trim for the Minneapolis DuctBlaster® Fan The Trim Piece secures the Minneapolis DuctBlaster® fan to the round transition piece or the fan to a flow ring during a leakage test. The Trim Piece is a single length of 40 inches.  

Static Pressure Probe - Magnetic

Static Pressure Probe The Static Pressure Probe is used to measure pressure in a supply trunk line or supply plenum during a Duct Blaster® duct leakage pressurization test as well as the operating pressure measurements with our TrueFlow® Air...

DG-1000 Gauge Board with Clamp

DG-1000 Gauge Board with Clamp This gauge board with clamp is used with the DG-1000 Pressure and Flow Gauge. The strong magnets on the DG-1000 and board create a secure attachment. A fan speed controller can also be clipped to the board below the...

Minneapolis DuctBlaster® Round Transition

Minneapolis DuctBlaster® Round Transition Piece This Minneapolis DuctBlaster® component connects to either the fan exhaust flange (pressurization testing), or the inlet flange (depressurization testing). The Minneapolis DuctBlaster® fan and...

Minneapolis DuctBlaster® Square Transition

Minneapolis DuctBlaster® Square Transition Piece This Minneapolis DuctBlaster® component is connected to a central return grille or at an air handler cabinet during a duct leakage test. See Chapter 5 of the Minneapolis DuctBlaster® User...

Minneapolis DuctBlaster® Ring 4

Minneapolis DuctBlaster® Flow Ring 4 Ring 4 is an optional flow ring accessory to the Duct Blaster®fan used to measure 25 – 2.4 CFM with a minimum fan pressure of 5 Pascals. Flow rates can be displayed using various TEC software or...

Minneapolis DuctBlaster® Ring 3

Minneapolis DuctBlaster® Flow Ring 3 Ring 3 for the Minneapolis DuctBlaster® fan measures 125 – 10 CFM with a minimum fan pressure of 3 Pascals. The flow ring temporarily attaches to the fan housing with a 40 inch piece of trim...