The ZipPole™ product is our new low-cost steel Spring Loaded Pole designed for commercial and residential contractors, as well as the DIY enthusiast. Like other ZipWall® Spring Loaded Poles, the ZipPole^TM product eliminates the need for ladders, tape or staples that can damage finished surfaces.

Available as a complete system, the ZP4 convenience pack can reach ceiling heights up to 10’ 3” tall. That’s enough for most jobs, yet when collapsed, it easily fits in the trunk of a car. The included Carry Bag makes it easy to store and transport your ZipWall system. It can hold up to 12 ZipPole^TM Spring Loaded Poles or additional accessories.

ZipPole^TM Spring Loaded Poles offer all the advantages of our original products, such as Spring Loading at the top. This lets you lift the pole to tuck the sheeting underneath for easy set up. It also maintains constant tension on the pole, compensating for movement of the pole at the ceiling or at the floor, if the poles are bumped, or if there is a lot of air movement at the job site.

Additional stability is ensured with non-skid, non-marking pad at the top of the pole that grabs the ceiling like magic, while the non-skid GripDisk^TM keeps the foot of the pole and the sheeting locked in position at the floor.

The ZipPole^TM product is made of rugged steel tubing. They have a baked-on finish and weigh just 1.5lbs each. Ideal for many uses, they can accept plastic or cloth sheeting up to 8 mils thick and can support up to 80 lbs each. The height of ZipPole^TM Spring Loaded Poles ranges from 4’ 2” to 10’ 3”. Poles should be placed every 8' to 10' or closer if there is a lot of air movement. Use a GripDisk^TM under each pole to secure it on smooth flooring like vinyl or wood.

The ZipPole^TM product can be used with our Tight Seal^TM accessories like Foam Rails^TM to create a continuous seal along the ceiling. It can be used with our Side Pack^TM to create a continuous seal along the walls. Doorways can be easily created with our Heavy Duty or Standard Zippers.