Standard Equipment Includes:

• Instrument with sensors as specified: Combustibles (%LEL)
• Stainless steel alligator clip
• Battery charger
• Calibration cap/hose
• Instructions in local languages
• Interactive training CD

Please note that hazardous materials shipping charges will apply for calibration kits.

Confined Space Kit Upgrade Additionally Includes:

• IR Connectivity Kit for data downloading and instrument setup
• Remote sampling kit with 10ft/3m sample tubing and probe
• Calibration gas
• Regulator
• Fittings
• Foam lined carrying case

SamplerPak Upgrade Additionally Includes:

• Sampler (motorized sampling pump)
• Sampling hose w/airstone filter (10ft/3m)
• Coiled connector hose
• Two sampling tubes (10.25 in/26 cm abd 4.65 in/12 cm)
• Carrying case

Water Resistant!

Gases & Measuring Range(s):

• H2S - 0-100ppm / 0-200ppm
• CO - 0-500ppm / 0-1000ppm
• O2 (% by volume) - 0-30%
• Combustibles - 0-100% LEL or 0-5% by volume methane

Detector: 1, 2, 3 or 4-gas detector

• Auto zero: Yes
• Calibration: Automatic
• Backlight: Alarm condition (auto) and reactivation on demand
• Full function self-test: Sensor integrity, circuitry and battery; audible/visual alarms
• Sensor: Plug-in, electrochemical cell (toxic and oxygen); plug-in, catalytic (LEL)
• User options: Adjustable STEL period (5 to 15 minutes in 1 minute intervals); set calibration span levels and due date; toggle ON/OFF; confi dence beep, oxygen auto-calibration at start-up, auto-zero LEL, CO and H2S on start-up, latching alarms, “SAFE” display function (does not display gas concentrations unless readings change), stealth mode for silent operations, force calibration when calibration overdue, calibration lockout (calibration must be invoked via IR), force bump test, bump test reminder, multi-language LCD selection in English, French, German, Portuguese and Spanish, 0-100% LEL (Lower Explosive Limit) or Methane gas 0-5.0% v/v selectable measurement, alarm setpoint disable (set to zero for off), calibration due date (1 to 365 days, or set to zero for off), confi dence beep (every 10 seconds when enabled), individual sensor enable/disable

Alarm Indicators: Clearly advises alarm levels with visual, audible and vibrating alarms

• Visual alarms: Wide-angled fl ashing LED alarm bars LCD indicates gas present and alarm levels encountered
• Audible alarm: 95 dB variable pulsed audible alarm at 11.81 in. / 30 cm (typical)
• Vibrator alarm: Pulses warning in gas alarm conditions, or for any status alarms
• Other: Low battery, over range, multiple gas and missing sensor

Alarm Levels: Instantaneous Low Alarm for all gases; instantaneous High Alarm for all gases; TWA (time weighted average) and STEL (short term exposure limit) for H2S, CO; OL (over limit alarm)

LCD: Continuous, alphanumeric gas readout and status display advises:

• Gases monitored: H2S, CO, O2, combustibles (0-100% LEL or 0-5.0% methane)
• Gas concentration: Simultaneous and continuously displays gas concentration(s) present (in ppm, %LEL, or % v/v)
• STEL/TWA ppm: Records STEL and TWA exposures and displays on demand
• Peak ppm or %: Records and displays peak exposure to gas and displays on demand
• Alarm setpoints: Displayed on activation

Tests:

• Full function self-test: Full function self-test on activation
• Battery: Continuous

General Specifications: Rugged, composite material with integral concussion-proof boot

• Operating temperature: -4 to 136 oF / -20 to 58 oC
• Temperature code: T4
• Humidity: 5% to 95% RH (non-condensing)

EMI/RFI: Complies with EMC Directive 89/336/EEC

• Ingress Protection: IP66/67 (expected)
• Battery run-time: Up to 14 hours (typical)
• Size: 4.2 x 2.4 x 1.4 in. / 10.7 x 6.0 x 3.6 cm
• Weight: 5.6 oz. / 160 g

Event Logging: Records and transmits up to 10 gas alarm events

• Event information: Gas type, peak exposure level (ppm or %); alarm duration in minutes and seconds; time elapsed since the alarm occurred in days, hours and minutes, life remaining, serial number, self-tests, cumulative alarm time

Datalogger: User-downloadable datalogger

• Data recorder: All events and occurrences
• Sampling rate: Factory set at 15-second intervals
• Storage: 16 hours; when full, the wraparound feature replaces oldest data with most recent data

Warranty: Full 2 year warranty including all sensors

Ratings and Certifications:

(Intrinsic safety)
• Class I, Div. 1, Gr. A, B, C, D
• ATEX: X g II 1 G* EEx ia IIC*
• IECEx: Ex ia IIC *in progress

DUE TO ONGOING RESEARCH AND PRODUCT IMPROVEMENT, SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.